banner



How To Repair A Moen Kitchen Faucet That Drips

Does anyone else go irritated when the bath faucet drips constantly? It drives me completely nuts to meet water just existence wasted twenty-four hour period in and day out. And apparently my youngest daughter feels the same way: she came to me the other day complaining near water coming from the faucet even though she hadn't turned information technology on however. At this point it was pretty clear that I needed to take care of this tiny issue 🙂

In this quick tutorial I'll share how to supplant the cartridge in a Moen bathroom faucet in less than 15 minutes. Faulty cartridges are ane reason yous get water leaking from bathroom faucets and they're easy to replace. So let'southward begin.

Lefty or Righty, That is the Question?

The first footstep in fixing any two handled faucet drip is to decide which handle has a bad seal. To test the left handle's seal you'll need to turn the water off to the right handle. Under your sink there should be two shutoff valves that connect the water lines to each respective faucet handle. The setup will wait like the film below.

Bathroom Faucet Shutoff Valves

Turn off the right handle's shutoff valve by turning it to the right until it stops. Then turn on the right handle at the sink to release the remaining water that's in information technology. Check the faucet to see if there are whatever leaks. Even if you lot do meet leaks this indicates the left handle's seals are bad.

You should also test to make sure the correct handle is in good shape.

In society to do this you need to turn the correct faucet handle's shutoff valve back on. Make sure water is running to the right faucet  handle then plough it back off. Now turn off the left handle's shutoff valve and release all the h2o out of it's supply line by turning the handle to the on position. Does the faucet accept whatsoever drips of water coming out of it? If the respond is no then your correct handle has skillful seals.

In my case there were still leaks when the right handle's shutoff valve h2o was turned off. This indicated a bad seal in the left faucet handle.

Let the Dismantling Begin

This is the fun part for me, taking apart the faucet. I ever encourage you lot to take pictures of the process in case you need to refer dorsum to how the setup employ to be before it was fiddled with.

In the case of this Moen faucet I needed to unscrew the base of the faucet handle. If you have a similar handle y'all can accomplish this by hand nearly of the time. Plow the base to the left to unscrew it.

Unscrewing the Faucet Handle Base
Expose the brass nut to the faucet handle body

This will betrayal the brass nut that holds the cartridge in identify. You'll demand to loosen the nut with a pair of channel locks. Turn the brass nut to the left to unscrew it.

Loosen the brass nut with channel locks

At this betoken mylarge tipis to take a picture of how the cartridge sits in the faucet handle torso. In that location are normally small square tabs on the cartridge that secure information technology in place but y'all'll also need to pay attending to the cartridge stem position.

Pay attention to the old faucet cartrdige position

Pull the cartridge direct up from the faucet body using the channel locks.

Remove the old faucet cartridge with channel locks

Take the cartridge with you to the hardware shop or Home Depot or Lowes in gild to find the correct replacement. I recommend ownership the proper name brand replacement cartridge. Sure they're a chip more expensive ($x-12) simply at least you know they'll work!!!

Take the old faucet cartridge to the store

It Doesn't Get Any Easier

With your new faucet cartridge in hand all y'all demand to do is refer dorsum to the picture you took of the stalk position.

Take a picture like this of the old faucet cartridge for reference

Take find of the pocket-sized square grooves in the faucet handle body likewise.

There are typically small grooves in the faucet handle body

At present simply insert your new Moen replacement sink cartridge into the faucet.

Insert the new Moen faucet replacement cartridge

Refasten the brass nut that secures the cartridge  in place by manus tightening it and so using channel locks.

Hand tighten the brass nut first then use channel locks

This nut doesn't need to be super tight. Only secure the brass nut enough to proceed water from leaking from underneath the new Moen replacement cartridge. A good manner to check this is to plough on the shutoff valve to the faucet handle before attaching the faucet handle itself.

With the bath sink's new Moen replacement cartridge in place you lot tin can now put on the faucet handle. Again, I hand tighten this type of handle only and don't employ channel locks.

Hand tighten the Moen faucet handle

The consequence of this repair is no more than water dripping from the faucet, no more than waste of a precious natural resource, and no more money being added to your h2o neb. Information technology's also piece of cake and affordable to perform.  And so why wait, fix your leaky faucet this week 🙂

What's Next

Hopefully this tutorial helped.

The biggest tip to remember is take the old Moen faucet cartridge with you to the store to ensure you're ownership the correct replacement.

If you're doing a bathroom remodel and need help, bring together one of our online courses – they'll make your bathroom renovation much easier!

Permit me know if you have whatever questions and I'll do my best to aid.

Thanks,

Jeff

Bath Faucet Repair

Source: https://homerepairtutor.com/how-to-fix-a-leaky-faucet-moen/

Posted by: brooksblaway.blogspot.com

0 Response to "How To Repair A Moen Kitchen Faucet That Drips"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel